User Manual

A
RF37
User Guide
Ref. 915MHz - 08-10-V2-psn p 11
3. Press OK to validate your choice.
4. Press to select another menu or OK to exit the Device
setting menu.
Changing the intensity of the noise filter
Depending on the noise level in the place where the products will be used,
you can choose an enhanced filter (F+) or a regular one (F).
Procedure
1. From the main screen, press for 2 seconds to access the
Device setting menu
2. Press again to access the Filter setting menu.
3. In the Filter setting menu, change the filter's intensity using
+ or -.
4. Press OK to validate your choice
5. Press to select another menu or OK to exit the Device
setting menu.
Changing Hopping frequency table
To communicate, the devices must be turned into the same table.
The system integrates 3 orthogonal hopping frequency tables which allow the
usage of 3 different systems in the same area.