User's Manual

Table Of Contents

208871A-V1.3-UG-VOKKERO-SQUADRA_915

4.2. Assigninganumbertoasystem(Rolemenu)

Tosetupaconference,rstlyyouhavetoidentifyallthedevicesthatwillbetakingpartandgivethemanumber

(role).Aconferencemaybeestablishedbetween2to6devices«Openmic»,whichwillbeidentiedbyanumber

rangingfrom1to6.

Note 1:Oneofthedevicesabsolutelymusthavethenumber1.

Note 2:Donotassignthesamenumbertoseveraldevicesworkingin«openmic»,asthiswillpreventtheconference

fromrunningsmoothly.

Procedure:

• Inthemainmenu,clickonthe“Role”icon.

• Awindowwillopen,askingyoutoselecttheterminalthatarolenumbermustbeassignedto.Clickonthe“OK”

button.

• Usingthestylus,selectthecommunicationchannelbyclickingonit.

• Awindowwillopen,inwhichtheterminalselectedwillbedisplayed.

• Usingthe“+”and“-”buttons,modifytherolenumber(from1to6or“Listener”foralistening-onlymode).

• Oncethenumberhasbeenselected,clickonthe“OK”buttoninordertovalidateit,oron“Escape”inorderto

exitfromthesub-menu.

Whenthe“OK”buttonhasbeenclickedon,awindowwillappearconrmingthattheoperationhasbeendulycomple-

ted.

• Clickon“OK”toreturntothehomescreen.

4.3. Settingthesystemsinconferencemode(encryptionprocedure)

Principle:Inordertocommunicateinsecuremode,thedevicesmustsaveanencryptionkeyprovidedbythecongu-

rator.

Thisoperationisrequiredinordertoenableallthedevicestotakepartinaconferenceinsecuremode.

IMPORTANT NOTE

Inencrypted(secure)mode,adevicecannotcommunicatewithasystemiftheencryptionprocedurehasnotbeen

carriedout.Ifyouwanttoaddaterminaltoanexistingsystem,youabsolutelymustcarryoutthisprocedurewithall

thesystem’sdevices(includingdevicesconguredinListenermode).

Makesurethateachofthefollowingcriteriaarefullledbeforestartingtheoperation:

• Allthedevicesmustusethesamechannel.

• OnlyonedeviceshouldhavetheID1.



Procedure:

• Inthemainmenu,clickontheEncryptionicon.

• TheNetworkEncryptionsub-menuwillappearandenableyoutoselecttwotypesofprocedures:LaunchEncryp-

tionandRemoveEncryption.Clickonthe“LaunchEncryption”icon.

• Awindowwillopenandaskyoutoconrmthelaunchingofthisprocedure.

• Clickon“Yes”.