Product Overview

Hydronic Heating System CLEANER
High performance MC3+
TM
from ADEY
®
, removes both black iron oxide sludge and limescale deposits.
MC3+ is formulated to provide enhanced sludge removal, with a higher concentrated formula, compared with
standard products, as one bottle treats systems with up to 15 radiators.
The latest MC3+ chemical is the product of extensive industry experience and testing, developed in ADEY’s own
accredited laboratory.
 High performance, powerful system cleaner
 Removes sludge, debris and scale
 Restores heating efficiency of existing systems
 Concentrated formula, treats 33 gallons – use less to treat more
 Compatible with all metals including aluminum
 Suitable for ALL hydronic heating systems
Physical and chemical properties
Product uses
For the removal of system sludge, debris and scale from existing hydronic heating systems, MC3+ loosens these
damaging elements, allowing them to be flushed from the system, restoring heating efficiency.
The advanced formula removes corrosion from all metals and alloys commonly found in hydronic heating
systems, including mild steel, copper, aluminum, and is compatible with all rubbers and other non-metallic
components.
How to use
One bottle of MC3+ treats up to 33 gallons.
Introduce MC3+ to the system via the purge and fill point or radiator using a suitable injector, or via a
MagnaClean
®
filter. For open vented systems MC3+ can be added via the expansion, remembering to remove
sufficient water via the drain-point to ensure MC3+ enters the system circuit.
Clean the system using ADEY’s MagnaCleanse
®
and MC3+. Following the cleanse, drain and flush the system
thoroughly until the water runs clear. Refill the system and add the correct dosage of MC1+
TM
for optimum
protection against corrosion and limescale.
Application
MC3+ is suitable for all sealed and open vented hydronic heating systems.
MC3+ is not suitable for use in single feed indirect “primatic” cylinders where potable water treatment is required.
Packaging, handling and storage
Available in 1.05 pints. MC3+ is classified as non-hazardous, non-toxic and biodegradable, but as for all
residential chemicals, keep out of reach of children and avoid contact with eyes and skin.
In case on contact with eyes, rinse immediately with water, seek medical attention if symptoms occur.
Not to be taken internally.
Store at temperature above 32°F.
Appearance:
Color:
Odor:
Solubility:
pH (concentrated solution):
Relative Density:
Liquid
Brown
Mild
Soluble in water
6.5
1.1