Specifications

Status Menu Selection 5-15
01 Aug 2000
Mode Parms Dialog
When
Mode Parms
is selected, the Mode Parms Dialog is
displayed. See Figure 5-10. This option is used to view the
changeable Mode Parameter pages. Refer to the document
number
600974 Scalar 1000 SCSI Reference Manual
for
additional information about the Scalar 1000 Mode
Parameters.
Figure 5-10 Mode Parms Dialog
Step 1 Press the button to select the current parameter
value and move to the next parameter.
— or —
Press the button or the button to toggle
between the parameter values in the following list.
Parameters Values
Mode Parms Element Address
Mixed Media
Parity
LCD
Type Current
Default
Saved
Accept Y to accept changes
N to reject changes
Press the button to confirm the change.
Step 2 Repeat Step 1 for the desired parameters in the list.
If
Y
is selected for the Accept parameter value, one of
twelve response screens appears. Refer to Figure 5-11 on
page 5-16 through Figure 5-22 on page 5-23. Otherwise,
the changed parameters continue to display but no action
is taken.
Select Mode Parms:
ELEMENT ADDRESS
<
and Type: CURRENT
Accept: N