Specifications

5-24 Menus and Commands
600561-A
Reservations Dialog
When
Reservations
is selected, the Reservations Dialog is
displayed. See Figure 5-23. This option is used to determine
the state of the element reservations made by a SCSI host, to
reserve elements for exclusive use within a multi initiator
environment.
Figure 5-23 Reservation Dialog
Step 1 Press the button to select the current
parameter value and move to the next parameter.
— or —
Press the button or the button to toggle
between the parameter values in the following list.
Parameters Values
Bus Indicates the SCSI Bus ID
number (0 .. 1)
Host ID Indicates the Host ID number
(0 .. 7)
Reservation ID Indicates the host’s reservation
identifier (0x00 .. 0xFF, Any)
Accept Y to accept changes
N to reject changes
Press the button to confirm the changes.
The value of the Found parameter in the
Reservation Dialog is supplied by the library
firmware and can not be changed.
Step 2 Repeat Step 1 for all of the parameters in the list.
If
Y
is selected for the Accept parameter value, the
Response Dialog appears.
Bus : 0
<
Host ID
:
0
Reservation ID: Any
Found : 0000
Accept: N