Specifications

5-38 Menus and Commands
600561-A
Drive State Dialog
When
Drive State
is selected, the Drive State Dialog is
displayed. See Figure 5-43. This option indicates the current
state of the selected drive.
Figure 5-43 Drive State Dialog
Step 1 Press the button to select the current
parameter value and move to the Continuation
Screen.
— or —
Press the button or the button to toggle
between the Drive parameter value in the
following list.
Parameters Values
Drive Indicates the element address
of the desired drive
(01200 .. 01247 for all 8mm and
DLT drives)
(01200-01215 for all half-inch
drives)
[more] More information on the
Continuation Screen
Press the button to select the Continuation
Screen.
The value of the State parameter in the Drive State
Dialog is supplied by the library firmware and can
not be changed. The State parameter indicates the
state of the drive (LOADED, UNLOADED,
LOADING, UNLOADING, DRIVE ERROR,
UNKNOWN).
Note
The library must
be offline.
Drive: 1200<
State: Loaded
Clean Required: No
[more]
Note
The Continuation
Screen could take
several seconds
to return with the
information.