Specifications

5-42 Menus and Commands
600561-A
Commands Menu Selection
The Commands Menu is primarily used to access various
Scalar 1000 commands.
Commands
is selected from the Main
Menu by following this procedure.
Step 1 If necessary, press the button until the Main
Menu appears.
The Main Menu appears with the indicator positioned at
Mode.
Step 2 Press the button or the button to position
the selection indicator at Commands.
Step 3 Press the button.
The Commands Menu appears. This menu offers four
selections. See Figure 5-47. The Commands Menu
defaults to the
Park
selection.
Figure 5-47 Commands Menu
To choose one of the four selections, follow the
steps.
Step 4 Press the button to select Park.
— or —
Press the button or the button to select the
Move Submenu, Inventory Dialog, or Insert/Eject
Submenu.
Press the button.
The selected screen appears. Refer to Park on page 5-43,
Move Submenu on page 5-43, Inventory Dialog on page
5-51 and Insert/Eject Submenu on page 5-54.
>
Park
Move
Inventory
...
Insert/Eject