Specifications

Commands Menu Selection 5-47
01 Aug 2000
Move Media Dialog
When
Move Media
is selected, the Move Media Dialog is
displayed. See Figure 5-54. This option moves cartridges
between elements without host intervention.
Figure 5-54 Move Media Dialog
Step 1 Press the button to select the current parameter
value and move to the next parameter.
— or —
Press the button or the button to toggle
between the parameter values in the following list.
Parameters Values
Coord The first field indicates the
type of cell (I for I/E Station, D
for Drive, S for Storage cell)
The second field indicates the
module number which can be
modified if expansion modules
are present (1 .. 4)
The third field indicates the
storage cell section (1 .. 4),
drive bay (1 .. 2), or IE station
number
The fourth field indicates the
column of the section (A .. E),
drive port (A .. B) or IE station
column
The fifth field indicates the row
of the column. (01 .. 12 for half
inch and DLT coordinates)
(01 .. 18 for 8mm coordinates)
Element Indicates the element number
which corresponds with the
coordinate parameter
Enter SOURCE
Coord: S< 02 1 A 01
OR Element: 00000
Accept : N