Specifications

5-48 Menus and Commands

600561-A

Accept Y to accept changes

N to reject changes

Press the button to confirm the changes.

Step 2 Repeat Step 1 for all of the parameters in the list.

is selected for the Accept parameter value, the Target

Menu appears. See Figure 5-55. Otherwise, the changed

parameters continue to display but no action is taken.

Figure 5-55 Target Dialog

Step 3 Press the button to select the current

parameter value and move to the next parameter.

— or —

Press the button or the button to toggle

between the parameter values in the following list.

Parameters Values

Coord The first field indicates the

type of cell (I for I/E Station, D

for Drive, S for Storage cell)

The second field indicates the

module number which can be

modified if expansion

modules are present (1 .. 4)

The third field indicates the

storage cell section (1 .. 4),

drive bay (1 .. 2), or IE station

number The fourth field

indicates the column of the

section (A .. E), drive port (A ..

B) or IE station column

Enter TARGET

Coord: I< 01 1 A 01

OR Element: 01182

Accept : N