Specifications

Commands Menu Selection 5-57
01 Aug 2000
Element Indicates the Insert/Eject
station element number where
the insert operation starts
Accept Y to accept changes
N to reject changes
Press the button to confirm the changes.
If
Y
is selected for the Accept parameter value, the Insert
Range Dialog appears. See Figure 5-67. Otherwise, the
changed actions continue to display but no action is
taken.
Figure 5-67 Insert Range Dialog
Step 2 Press the button to select the current parameter
default value and move to the next parameter.
— or —
Press the button or the button to toggle the
Insert Range parameter values.
Parameters Value
Insert Range Indicates the number of
elements for the insert
operation (01 .. 12 for half inch
and DLT elements)
(01 .. 18 for 8mm elements)
Accept Y to accept changes
N to reject changes
Press the button to confirm the changes.
If
Y
is selected for the Accept parameter value, the Target
Dialog appears. See Figure 5-68. Otherwise, the changed
actions continue to display but no action is taken.
Insert Range: 01<
Accept : N