Specifications

Database Menu Selection 5-65
01 Aug 2000
Database Menu Selection
The Database Menu is primarily used to gain element
database information.
Database
is selected from the Main
Menu by following this procedure.
Step 1 If necessary, press the button until the Main
Menu appears.
The Main Menu appears with the indicator positioned at
Mode.
Step 2 Press the button or the button to position
the selection indicator at Database.
Step 3 Press the button.
The Database Menu appears. This menu offers four selections.
See Figure 5-77. The Database Menu defaults to the
Media
selection.
Figure 5-77 Database Menu
To choose one of the four selections, follow the
steps.
Step 4 Press the button to select the Media Dialog.
— or —
Press the button or the button to select the
Element Dialog, Config Dialog, or the Advanced
Dialog.
Press the button.
The selected menu appears. Refer to Media Dialog on
page 5-66, Element Dialog on page 5-67, Config Dialog
on page 5-70, or Advanced Dialog on page 5-71.
>
Media
...
Element
...
Config
...
Advanced