Specifications

5-66 Menus and Commands
600561-A
Media Dialog
When
Media
is selected, the Media Dialog is displayed. This
option obtains information about specific cartridges based on
the barcode label.
In default or mixed media mode, 6 characters are required. In
extended mode, five characters are required. However, up to
sixteen characters may be entered. Figure 5-78 shows the
Media Dialog.
Figure 5-78 Media Dialog
Step 1 Press the button to select the current
parameter value and move to the next parameter.
— or —
Press the button or the button to toggle
the parameter values in the following list.
Parameters Values
AAAAA Indicates the volume label
(A .. Z, 0 .. 9, ^, *)
Accept Y to accept changes
N to reject changes
Press the button to confirm the changes.
Step 2 Repeat Step 1 for all of the parameters in the list.
If
Y
is selected for the Accept parameter value, the
Response Screen, refer to Figure 5-79 on page 5-67,
appears. Otherwise, the changed parameters continue to
display but no action is taken.
Enter volume label:
AAAAAA
^
Accept : N
Note
If in extended
mode, the space
value (^) erases
the remaining
values and the
wildcard value (*)
is used to indicate
that any volume
label that
includes the
preceding values
will be selected.