Specifications

5-68 Menus and Commands
600561-A
Press the button or the button to toggle
between the parameter values in the list.
Parameters Values
Coord The first field indicates the
type of cell (I for I/E Station, D
for Drive, S for Storage cell)
The second field indicates the
module number which can be
modified if expansion
modules are present (1 .. 4)
The third field indicates the
storage cell section (1 .. 4),
drive bay (1 .. 2), or IE station
number
The fourth field indicates the
column of the section (A .. E),
drive port (A .. B) or IE station
column
The fifth field indicates the
row of the column. (01 .. 12 for
half inch and DLT
coordinates)
(01 .. 18 for 8mm coordinates)
Element Indicates the element number
which corresponds with the
coordinate parameter
Accept Y to accept changes
N to reject changes
Press the button to confirm the changes.
Step 2 Repeat Step 1 for all of the parameters in the list.
If
Y
is selected for the Accept parameter value, the
Response Dialog appears. Refer to
Figure 5-81 on page 5-69. Otherwise, the changed
actions continue to display but no action is taken.