Specifications

Setup Menu Selection 5-83
01 Aug 2000
Trace Dialog
When
Trace
is selected, the Trace Dialog is displayed. See
Figure 5-96. This option defines and enables the serial service
port.
Figure 5-96 Trace Dialog
Step 1 Press the button to select the current parameter
value and move to the next parameter.
— or —
Press the button or the button to toggle
between the parameter default values in the
following list.
Parameters Values
USE SERIAL indicates information
is returned via the serial port
NONE is the default to allow
the port to be used for RMU
communication
VCONSOL is used for
development only
Accept Y to accept changes
N to reject changes
Press the button to confirm the changes.
Step 2 Repeat Step 1 for all of the parameters in the list.
If
Y
is selected for the Accept parameter value, the screen
updates to reflect the changes. Otherwise, the changed
parameters continue to display but no action is taken.
Trace output
USE: NONE<
Accept: N
Note
If the RMU is not
installed, this
option must be
set to SERIAL in
order to prevent a
SAC from being
posted.