Specifications

5-84 Menus and Commands
600561-A
Security Dialog
When
Security
is selected, the Security Dialog is displayed.
See Figure 5-97. This option changes the Operator Panel LCD
Security mode and/or the password that protects it. The
Operator Panel can also be secured by the host. Whichever
method is used to secure the Operator Panel must be the
method used to release the security. If a password has not
been set, the password dialog screen is shown.
Figure 5-97 Security Dialog
Switching Security From Off to On
To switch the security from off to on, follow the steps below:
Step 1 Press the button to select the current
parameter value and move to the next parameter.
— or —
Press the button or the button to toggle
between the parameter values in the following list.
Parameters Values
Security Y to enable LCD security
N to disable LCD security
Password If the password is to be
changed, refer to
Changing the
Password
on page 5-87. If the
password is not to be changed,
select N
Accept Y to accept changes
N to reject changes
Press the button to confirm the changes.
Step 2 Repeat Step 1 for all of the parameters in the list.
Security Enabled : N<
Change password : N
Accept : N