Specifications

5-86 Menus and Commands
600561-A
Switching Security From On to Off
To switch the security from on to off, follow the steps below:
Step 1 Press the button to select the current
parameter value and move to the next parameter.
— or —
Press the button or the button to toggle
between the parameter values in the following list.
Parameters Values
Security Y to enable LCD security
N to disable LCD security
Password If the password is to be
changed, refer to
Changing the
Password
on page 5-87. If the
password is not to be changed,
select N
Accept Y to accept changes
N to reject changes
Press the button to confirm the changes.
Step 2 Repeat Step 1 for all of the parameters in the list.
If
Y
is selected for the Accept parameter and the security
parameter is disabled, the Password Dialog appears. See
Figure 5-100.
If
N
is selected for the Accept parameter, the changed
parameters continue to display but no action is taken.
Figure 5-100 Password Dialog
Step 3 Press the button to select the current
parameter value and move to the next parameter.
— or —
Enter password :
[0000]
^
Accept : N