Specifications

5-92 Menus and Commands
600561-A
Emulate Dialog
When
Emulate
is selected, the Emulate Dialog is displayed.
See Figure 5-105. This option changes the operating mode of
the library. Different emulation modes cause the library to
respond to SCSI INQUIRY commands in a manner consistent
with the listed library emulation type. Any change will not
take effect until the library power is cycled.
Figure 5-105 Emulate Dialog
Step 1 Press the button to select the current
parameter value and move to the next parameter.
— or —
Press the button or the button to toggle
between the parameter values in the following list.
Parameters Values
Library type NATIVE
STK 9710
EXB 480
EMASS
Accept Y to accept changes
N to reject changes
Press the button to confirm the changes.
Step 2 Repeat Step 1 for all of the parameters in the list.
If
Y
is selected for the Accept parameter value, the screen
updates to reflect the changes. Otherwise, the changed
parameters continue to display but no action is taken.
Select library type :
NATIVE
<
Accept : N
Note
Refer to the
document
number
600974
Scalar 1000 SCSI
Reference Manual
for all command
processing.