Specifications

5-94 Menus and Commands
600561-A
Figure 5-107 Name/DHCP Dialog
Step 1 Press the button to select the current
parameter value and move to the next parameter.
— or —
Press the button or the button to toggle
between the parameter values in the following list.
Parameters Values
DHCP Y to enable DHCP
communication
N to disable the DHCP
communication
Name Indicates the host name
assigned to the RMU for
communicating with the
library via the RMU (letters
A .. Z and numbers 0 .. 9).
Accept Y to accept changes
N to reject changes
Press the button to confirm the changes.
Step 2 Repeat Step 1 for all of the parameters in the list.
If
Y
is selected for the Accept parameter value, the screen
updates to reflect the changes. Otherwise, the changed
parameters continue to display but no action is taken.
DHCP : N<
Name : webfoot3
Accept : N