Specifications

Setup Menu Selection 5-95
01 Aug 2000
IP Dialog
When IP is selected, the IP Dialog is displayed. See
Figure 5-108. The IP Dialog allows the user to set the IP,
Subnet and Gateway network addresses for library
communication via the RMU.
Figure 5-108 IP Dialog
Step 1 Press the button to select the current parameter
value and move to the next parameter.
— or —
Press the button or the button to toggle
between the parameter values in the following list.
Parameters Values
IP Indicates the IP address (four
sets of numbers 0 .. 999)
Sub Indicates the Subnet address
(four sets of numbers 0 .. 999)
Gat Indicates the Gateway (four
sets of numbers 0 .. 999)
Accept Y to accept changes
N to reject changes
Press the button to confirm the changes.
Step 2 Repeat Step 1 for all of the parameters in the list.
If
Y
is selected for the Accept parameter value, the screen
updates to reflect the changes. Otherwise, the changed
parameters continue to display but no action is taken.
IP : 100<100.100.100
Sub: 225.225.225.225
Gat: 100.100.100.100
Accept: N