Specifications

Setup Menu Selection 5-97
01 Aug 2000
Operating Mode 0 to select Normal mode of
operation
1 to select a 3 second delay
before a Get operation is
performed on a DLT drive
after detecting that a tape was
ejected
2 to allow the Scalar 1000 to
issue an UNLOAD command
to the Model 4001S, Model
7001S, Model 8001S, AIT3102,
AIT5002, AIT5102, and NCTP
drives if the cartridge is not
ejected by the host
3 to activate options 1 and 2
4 to disable automatic
cartridge recovery on PUT
failures
5 to activate options 1 and 4
6 to activate options 2 and 4
7 to activate options 3 and 4
Accept Y to accept changes
N to reject changes
Press the button to confirm the changes.
Step 2 Repeat Step 1 for all of the parameters in the list.
If
Y
is selected for the Accept parameter value, the screen
updates to reflect the changes. Otherwise, the changed
parameters continue to display but no action is taken.