Specifications

Setup Menu Selection 5-99

01 Aug 2000

If Drive ID Override is disabled and Y is selected for

Accept, the changed parameters continue to display but

no new screen action is displayed.

— or —

is selected for the Accept parameter, the changed

parameters continue to display but no action is taken.

Figure 5-111 SCSI ID Dialog

Step 2 Press the button to select the current parameter

value and move to the next parameter.

— or —

Press the button or the button to toggle

between the parameter values in the following list.

Parameters Values

Drive Indicates the element index of

the drive

(01200 .. 01247 for DLT and

8mm)

(01200 .. 01215 for all half-inch)

Next Next indicates the SCSI ID

address that takes effect after

power is cycled (0 .. 15)

Now The SCSI ID address that is

currently in effect (0 .. 15)

Accept Y to accept changes

N to reject changes

Press the button to confirm the changes.

is selected for the Accept parameter value, the screen

updates to reflect the changes. Otherwise, the changed

parameters continue to display but no action is taken.

SCSI ID

Drive Next Now

1200< 01 01

Accept: N