Specifications

Setup Menu Selection 5-101
01 Aug 2000
Drives Dialog
When
Drives
is selected, the Drives Dialog is displayed. See
Figure 5-113. This option allows selection of automatic
cleaning for Model 4001S, Model 7001S, Model 8001S,
AIT3102, AIT5002, AIT5102, and NCTP drives.
Figure 5-113 Drives Dialog
Step 1 Press the button to select the current parameter
value and move to the next parameter.
— or —
Press the button or the button to toggle
between the parameter values in the following list.
Parameters Values
AutoClean Y to enable automatic drive
cleaning
N to reject automatic drive
cleaning
Schedule Immediate to allow drive
cleaning when requested by
the drive
Delayed to schedule drive
cleaning for requesting drives
at the specified time
Hours Hour (00 .. 23) that cleaning
should start
Min Minute (0 .. 59) that cleaning
should start
Accept Y to accept changes
N to reject changes
Press the button to confirm the changes.
Step 2 Repeat Step 1 for all of the parameters in the list.
AutoClean: Y<
Schedule: Delayed
Hours: 00 Min :00
Accept:: N
Note
If Immediate
cleaning is
selected, no time
values can be
entered.