Specifications

Setup Menu Selection 5-103
01 Aug 2000
Media Dialog
When
Media
is selected, the Media Dialog is displayed. See
Figure 5-114. This option allows an operator to specify DLT or
AIT 8mm cleaning tapes by BC in the library.
A BC mask is a valid, partial barcode label that can be
followed by a wildcard character (*). Barcode labels that
match the mask are moved as cleaning tapes. The BC mask
must not match more than a maximum of 127 cleaning tapes.
Figure 5-114 Media Dialog
Step 1 Press the button to select the current parameter
value and move to the next parameter.
— or —
Press the button or the button to toggle
between the parameter values in the following list.
Parameters Values
Media Type Selects the medium type
(DLT, 8mm, NCTP)
BC Indicates the BC mask of the
cleaning cartridge(s)
Continue Y to accept changes
N to reject changes
Press the button to confirm the changes.
Step 2 Repeat Step 1 for all of the parameters in the list.
If
Y
is selected for the Continue parameter value, the Usage Dialog
appears. Refer to
Figure 5-115 on page 5-104
. Otherwise, the
changed parameters continue to display but no action is taken.
Media Type: DLT
BC : AAAAAA
^
Continue: N