Specifications

5-120 Menus and Commands

600561-A

drive bay (1 .. 2), or IE station

number

The fourth field indicates the

column of the section (A .. E),

drive port (A .. B) or IE station

column

The fifth field indicates the

row of the column. (01 .. 12 for

all half inch and DLT

coordinates)

(01 .. 18 for 8mm coordinates)

Element Indicates the element number

which corresponds with the

coordinate parameter

Accept Y to accept changes

N to reject changes

Press the button to confirm the changes.

Step 4 Repeat Step 3 for all of the parameter in the list.

is selected for the Accept parameter value, the Drive

Range Dialog appears. See Figure 5-131. Otherwise, the

changed actions continue to display but no action is

taken.

Figure 5-131 Drive Range Dialog

Step 5 Press the button to select the current

parameter default value and move to the next

parameter.

— or —

Press the button or the button to toggle

the parameter values.

Drive Range: 01<

Accept: N