Specifications

Utils Menu Selection 5-121
01 Aug 2000
Parameters Values
Drive Range Indicates the number of drives
to receive the firmware
update.
Drives are in order of their
element address
Accept Y to accept changes
N to reject changes
Press the button to confirm the changes.
Step 6 Repeat Step 5 for all of the parameter in the list.
If
Y
is selected for the Accept parameter value, the two
Response Screen appears. See Figure 5-132. Otherwise,
the changed actions continue to display but no action is
taken.
Figure 5-132 Response Screen
Step 7 Press the button to select the current parameter
default value.
— or —
Press the button or the button to toggle the
Cancel parameter values.
Parameters Values
Status Running indicates that the
current command is in
progress.
Completed indicates the
firmware on all the drives in
the cycle has been updated.
Canceled indicates the cycle
has been canceled
ERROR! indicates an error has
occurred
-UPDATE MICROCODE-
Cycle 1 of 3
Status: Running
Cancel: N<