Specifications

Utils Menu Selection 5-123
01 Aug 2000
Clean Drives Dialog
When
Clean Drives
is selected, the Clean Drives Dialog is
displayed. See Figure 5-133. This option initiates a drive
cleaning operation.
Figure 5-133 Clean Drives Dialog
Step 1 Press the button to select the current parameter
default value and move to the next parameter.
— or —
Press the button or the button to toggle the
Coordinate parameter values.
Parameters Values
Coord The first field indicates the
type of cell (I for I/E Station, D
for Drive, S for Storage cell)
The second field indicates the
module number which can be
modified if expansion modules
are present (1 .. 4)
The third field indicates the
storage cell section (1 .. 4),
drive bay (1 .. 2), or IE station
number
The fourth field indicates the
column of the section (A .. E),
drive port (A .. B) or IE station
column
The fifth field indicates the row
of the column. (01 .. 12 for half
inch and DLT coordinates)
(01 .. 18 for 8mm coordinates)
Element Indicates the element number
which corresponds with the
coordinate parameter
Enter TARGET
Coord: D< 01 1 A 01
OR Element: 01200
Accept: N