Specifications

5-130 Menus and Commands
600561-A
Service Menu Selection
The Service Menu is primarily used to execute various
Scalar 1000 diagnostics and exercisers. These options are
primarily intended for trained service representatives.
Service
is selected from the Main Menu by following this
procedure.
Step 1 If necessary, press the button until the Main
Menu appears.
Step 2 Press the button or the button to position
the selection indicator at Service.
Step 3 Press the button.
The Service Menu appears. This menu offers six
selections. See Figure 5-144. The Service Menu defaults
to the
Start
selection.
Figure 5-144 Service Menu
To choose one of the six selections, follow the steps.
Step 4 Press the button to select the Start Dialog
— or —
Press the button or the button to select the
Diags Submenu, Teach Submenu, SAC Dialog,
Demo Dialog, or Advanced Dialog.
Press the button.
The selected menu appears. Refer to Start Dialog on
page 5-131, Diags Submenu on page 5-133, Teach
Submenu on page 5-167, SAC Dialog on page 5-172,
Demo Dialog on page 5-172, or Advanced Dialog on
page 5-175.
>
Start
...
Demo
...
Diags Advanced
Teach
SAC
...