Specifications

5-132 Menus and Commands
600561-A
Step 2 Press the button to select the current
parameter value.
— or —
Press the button or the button to toggle
between the parameter values in the following list.
Parameters Values
Confirm change Y to accept changes to PM
values.
N to reject changes to PM
values.
Press the button to confirm the changes.
If
Y
is selected for the Confirm Change parameter value
and no errors were present, the Start Dialog with No
Error, see Figure 5-147, is displayed.
If
Y
is selected for the Confirm Change parameter value
and recent errors were present, the Start Dialog with
Errors, refer to Figure 5-148 on page 5-133, is displayed.
This option provides information for a service call. The
Service Action Code (SAC) is based on the displayed
error code. Refer to Service Action Codes on page 7-3 for
additional information. Refer to document number
600838-D Scalar 1000 Maintenance Manual for a
course of action related to the displayed SAC.
If
N
is selected for the Confirm Change parameter value,
the Preventative Maintenance Due is displayed.
Figure 5-147 Start Dialog with No Errors
There are no more
SACs to report