Specifications

Service Menu Selection 5-139
01 Aug 2000
Wrap Dialog
When
Wrap
is selected, the Wrap Dialog is displayed. See
Figure 5-154. This option tests the ability of the system sensors
to report state changes.
Figure 5-154 Wrap Dialog
Step 1 Press the button to select the current parameter
value and move to the next parameter.
— or —
Press the button or the button to toggle
between the parameter values in the following list.
Parameters Values
Device Indicates the list of sensors to
test (All, Gripper_Tach,
IE_Lock, Y_Home, X_Home,
Touch_Tip, Gripper_Open,
Retract_Complete, IE_Open)
Accept Y to accept changes
N to reject changes
Press the button to confirm the changes.
Step 2 Repeat Step 1 for all of the parameters in the list.
If
Y
is selected for the Accept parameter value, the
Response Screen appears. Refer to Figure 5-155 on page
5-140. Otherwise, the changed parameters continue to
display but no action is taken.
Device:
ALL SENSORS <
Results :
Accept: N