Specifications

5-164 Menus and Commands
600561-A
SelfTest Dialog
When
SelfTest
is selected, the SelfTest Dialog is displayed.
See Figure 5-178. This option executes a predetermined
sequence of diagnostics and exercisers.
Figure 5-178 SelfTest Dialog
Step 1 Press the button to select the current
parameter values and move to the next parameter.
— or —
Press the button or the button to toggle
between the parameter values in the following list.
Parameters Values
Cycles to Run Indicates the desired cycle
count (001 .. 999)
Accept Y to accept changes
N to reject changes
Press the button to confirm the changes.
Step 2 Repeat Step 1 for all of the parameters in the list.
If
Y
is selected for the Accept parameter value, the
Response Dialog appears. See Figure 5-179. Otherwise,
the changed parameters continue to display but no action
is taken.
Figure 5-179 Response Dialog
The self test runs
a sequence of diags.
Cycles to run: 009<
Accept: N
DIAGS SELF TEST
Cycle : 006 of 009
Status: Running
Cancel: N<