Specifications

Service Menu Selection 5-173
01 Aug 2000
— or —
Press the button or the button to toggle
between the parameter values in the following list.
Parameters Values
Cycles to Run Indicates the desired cycle
count (001 .. 999)
Accept Y to accept changes
N to reject changes
Press the button to confirm the changes.
Step 2 Repeat Step 1 for all of the parameters in the list.
If
Y
is selected for the Accept parameter, the Include
Drives Dialog appears. See Figure 5-192. Otherwise, the
changed parameters continue to display but no action is
taken.
Figure 5-192 Include Drives Dialog
Step 3 Press the button to select the current parameter
value and move to the next parameter.
— and/or —
Step 4 Press the button or the button to toggle the
values in the following list.
Parameters Values
Include Drives Y indicates that the drives will
be included in the cycling of
the cartridges
N indicates that the drives will
not be included in the cycling
of the cartridges.
Accept Y to accept the changed
N to reject the changes.
Include drives: Y
Accept: Y