Specifications

5-174 Menus and Commands
600561-A
If
Y
is selected for the Accept parameter value, the
Response Dialog appears. See Figure 5-193. Otherwise,
the changed parameters continue to display but no action
is taken.
Figure 5-193 Response Dialog
Step 5 Press the button or the button to toggle
the Cancel parameter values.
Parameters Values
Cancel Y to cancel the test.
N to continue running the test.
Press the button to confirm the changes.
The value of the Cycle parameter in the Response
Dialog is supplied by the library firmware and can
not be changed. The Cycle parameter indicates the
number of completed test cycles of requested
cycles.
The value of the Status parameter in the Response
Dialog is supplied by the library firmware and can
not be changed. The Status parameter shows the
status of the indicated cycle (Running, Completed,
Error, Canceled).
If
Y
is selected for the Cancel parameter value, the test is
cancelled. Otherwise, the test continues.
Demo with Drives
Cycle : 5 of 9
Status: Running
Cancel: N<
Note
If the operation
stops, the Cancel
parameter no
longer displays.