Specifications

Ejecting Media 6-5
01 Aug 2000
Insert/Eject Station
Using the Insert/Eject Station to remove cartridges does not
disrupt library operations. To remove cartridges through the
Insert/Eject Station, follow this procedure.
Step 1 Issue a SCSI MOVE MEDIUM command from the
host with the source storage cell and the destination
Insert/Eject Station cell.
— or —
Execute the Eject command from the Operator
panel. Refer to
Eject Dialog
on page 5-61.
The Insert/Eject Station is locked while the accessor
moves the cartridge. After the move completes, the
Insert/Eject Station unlocks.
Step 2 Pull on the handle to open the Insert/Eject Station.
Step 3 Remove the cartridge from the storage cell.
Step 4 Close the Insert/Eject Station.