Specifications

Subsystem Description 2-9
01 Aug 2000
Figure 2-2 Coordinate System
Figure 2-2 on page 2-9 shows additional information that can
be used to identify various fields in the coordinate system.
The Scalar 1000 contains cartridge storage cells in all the
attached modules as follows:
• For the half inch/DLT module configuration, refer to
Figure 2-3 on page 2-10.
• For the 8mm module configuration, refer to Figure 2-4 on
page 2-11.
4x12 or 4x18
Storage Array
1x10 or 1x15
Storage Array
1x10 or 1x15
Storage Array
Drive Bay 2
Drive Bay 1
Drive
Column
A
Drive
Column
B
Drive
Column
A
Drive
Column
B
Control Module
1x10 or 1x15
Storage Array
1x10 or 1x15
Storage Array
Drive Bay 2
Drive Bay 1
Drive
Column
A
Drive
Column
B
Drive
Column
A
Drive
Column
B
Expansion Module
Column A Column B
Column C
Column D Column E
5x10 or 5x15 Storage Array
Drive Bay - Starts
from bottom to
top
Drive Ports - # of
Drive port:
Low Profile - 3/6
High Profile - 1
5x12 or 5x18
Storage Array
Column A Column B
Column C
Column D Column E
5x10 or 5x15 Storage Array
Storage Section 1
Storage Section 2
Storage Section 3
Storage Section 4
I/E Station