Specifications

Remote Management Unit (RMU) 4-9
01 Aug 2000
System Administrator Responsibilities
The System Administrator (SA) must setup the RMU for
proper operation. The SA responsibilities includes
establishing a network address for the RMU and establishing
the Uniform Resource Locators (URL). The network address
consists of an Internet Protocol (IP) address, subnet mask, and
gateway IP Address. Refer to
RMU Submenu
on page 5-93 for
information about setting the network address via the
Operator Panel. After the network address has been
established, the SA should test the RMU and URL via a Web
browser. Once the URL has been verified and accounts have
been created, the SA can broadcast the URL address to the
potential RMU users. The SA can delete users and change any
user password.
Menu Structure Description
The RMU startup dialog, Figure 4-2 on page 4-11, is divided
into two navigation frame segments and a single information
frame segment. The first of three illustrated segment
descriptions is the left navigation frame. The left navigation
frame has six hyperlinks as indicated in the following list:
• Logout
• Contents
• Documentation
• Support
• Version
• www.adic.com
Refer to
Left Navigation Frame
on page 4-12 for the dialogs and
hyperlink descriptions.
The second segment is the top information frame. There are no
hyperlinks or subsequent dialogs for this frame. One field
value associated with this frame follows:
• URL identifier and equipment type
Refer to
Top Information Frame
on page 4-17 for the dialog.
The third segment is the center navigation frame. The center
navigation frame has six tab style hyperlinks as indicated in
the following list:
• Status
• Configuration
• Firmware
• Diagnostic file