Specifications

5-10 Menus and Commands
600561-A
Press the button to confirm the change.
Step 4 Repeat Step 3 for the desired parameters in the list.
When toggling between the Ready and NotReady states,
the following two screens, refer to Figure 5-4 on page
5-10 and Figure 5-5 on page 5-10, appear. When
Shutdown is selected, the Shutdown Screen appears. See
Figure 5-6.
Figure 5-4 Ready Screen
Figure 5-5 NotReady Screen
Figure 5-6 Shutdown Screen
Table 5-1 details the state and mode descriptions available
under the Mode screen.
Changing state to:
>READY<
Changing state to:
>NOT READY<
The library can now
be rebooted