Operation Manual

14
NORMAL TIME DISPLAY
1. Press A for EL.
2. Press B to change modes. Mode sequence is time, my log, alarm, timer.
3. Press D to flash to TIME 2; press and hold D to toggle TIME 1 and TIME 2.
4. Press E to toggle chime on/off. Press and hold E for chronograph mode on 50 Lap
Digital Models. On 10-30 Lap Digital Models, press and hold E for timer mode.
5. Press and hold A, B, D and E for 5 seconds to master reset the watch. All data will
be erased, and all settings will be set to default.
TIME/CALENDAR SETTING
1. In normal time display, press and hold A to enter setting mode; hour will begin
flashing.
2. Press E to increase setting value. Press D to decrease setting value.
3. Press B to set and advance to next setting value.
4. Setting sequence is hour, minute, second, year, month, date, 12/24-hour time,
date format.
5. Press A to save data and exit setting mode.
ALARM MODE
1. Press B to change to alarm mode.
2. Press D to toggle between alarms 1 and 2.
3. Press E to toggle alarm on/off.
ALARM SETTING
1. In alarm mode, press and hold A to enter setting mode; hour will begin flashing.
2. Press D to decrease; press E to increase.
3. Press B to set and advance to next setting value.
4. Setting sequence is hour, minute, T1/T2.
5. Press A to save data and exit setting mode.
NOTE: Alarm status will be ON automatically after exit the ALARM SETTING mode.
No button operation for 60 seconds will auto-exit with changes saved, but alarm
status OFF.
A E
C
BD
C
A
E
B
D
50 LAP DIGITAL 10-30 LAP DIGITAL