User Guide

Ⅴ.HCmaker 7 printer software and printing steps
5.1 Software copy
Insert the SD card into the computer, SD card file "4. control software, Repetier-Host
installation and introduction", there are various systems Repetier-Host control
software installation package, You can copy the required installation to your
computer.
5.2 Install control software
1）Please unzip the downloaded RepetierHost, and then follow the prompts to
complete the installation. (refer to SD card data 4. control software Repetier-Host
installation and introduction
when installed,pay attention to the two that do not need to hook, otherwise some of
the network can not connect wire to install.
2）Using the desktop icons or start menu’s shortcuts to start the software .
5.3 Setting control software
Users can use Repetier-Host software to control HCmaker 7 printer to print, you
should set up control software, open Repetier-Host.