Specifications

Specifications

4) TRAIN

Setting range: 1 to 999

Continuous operation when set to “run”

Stimulation Output

1) Output polarity and OFF

Polarity switch: Positive/negative polarity

(No effect on MODULATION or MIXING polarity)

OFF: No output to ISOLATOR or OUTPUT

2) MODULATION

Amplitude: Depends on amplitude of external signal including

polarity (Max. ±10 V)

Linearity: within ±7% at ±1 V to ±10 V

Input impedance: 100 kilohms or over

No modulation in relation to MIXING waveform

3) MIXING

Mixing method: Analog addition

Mixing voltage range: 0 to ±10 V

(Voltage after mixing: max. ±10 V)

Linearity: within ±7% at ±1 V to ±10 V

Input impedance: 100 kilohms or over

4) DC

Output voltage: Direct current 0 to ±10 V

Direct current 0 to ±50 V when ±50 V output is

selected

5) Isolator output (to ISO)

Pin: 1, 2 +15 V

3 –15 V

4 Signal output

5 Range data

7 Range data synchronizing clock

8Void

9Void

10 Void

The fourth signal is not output fivefold when ±50 V output is selected.

(±10 V)

6) Output

Linearity: 0 to ±1 V, within ±50 mV

Within ±1 V to ±10 V ±5%

Output impedance: 100 kilohms or less (at RL ≥ 2 kilohms)

Output waveform: 3 µs or less both rising and falling

Excessive deviation: 5% or less