Model # 629-206 6-CUBBY LOCKER Assembly & installation guide Six Cubby Locker ADI629-206-SERIES USER GUIDE
Thank you for your purchase. AdirOffice has a commitment to deliver quality and stylish office furniture and equipment. We understand starting and maintaining a business is expensive enough. We can help you make it cost effective and beautiful. Plus, our expert team makes sure everything you need works as efficiently as possible.
Table of Contents 1 Introduction 2 Parts List 4 Assembly Instructions 10 Installation Instructions 12 Notes 15 Limited Warranty 16 Disclaimer
Introduction INTRODUCTION The AdirOffice 6-Cubby Locker Locker is designed to provide storage and security for your home or office. The lockers are conveniently designed so that they can be installed with multiple units if desired. The AdirOffice 6-Cubby Locker Locker is designed to provide storage and security for your home or office. The lockers are conveniently designed so that they can be installed with multiple units if desired. Single Unit Use a single, standalone unit.
Parts Included INCLUDED HARDWARE: Bolts + Washers Nuts Flat Head Screws Keys x4 x4 x12 6 sets of 2 keys Round Head Screw Coat Hooks INCLUDED HARDWARE: Wall Anchors x12 Bolts + Washers 1. Bolts+x2(x4) 3. Nuts Bolts Washers Nuts(x4) x4 x4 (x4) 2. Washers REQUIRED TOOLS: x6Double Flat Head Screws Nuts Flat Head Screws 4. Hooks (x6) x4 x4 x12 Keys 5.
PARTS Parts Included 6-Cubby Door Panel Locker A. B. C. D. Left Panel Top Panel Back Panel E. Right Panel F. Middle Panels G.
Assembly Instructions ASSEMBLY INSTRUCTIONS STEP 1: 6-Cubby Locker A. Place the Left Panel (B) onto the left side of the Back Panel (D). B. Line up the “C” shape of the Left Panel (B) so that it hooks under the “L” shape of the Back Panel (D). C. A djust as needed so that the screw holes line up. Using a Phillips screwdriver and the included Round Head Screws (7), secure the two panels together at the points shown. 1.
ASSEMBLY INSTRUCTIONS 6-Cubby Locker Assembly Instructions STEP 2: A. Place the Right Panel (E)to ontoback the right panel side of the Back Panel (D). right panel 2. Attach B. Line it up so that the “C” shape of the Right Panel (E) hooks under the “L” shape of the Back Ɣ Place the right the right side1.of the back panel. Panelpanel (D), asonto described in Step C. so Adjust so that holes line up.
ASSEMBLY INSTRUCTIONS Assembly Instructions 6-Cubby Locker STEP 3: A. Stand the 3 assembled sides of the locker up. B. To attach the Door Panel (A) piece, move the Door Panel (A) into the locker at an angle so that it is completely inside of the enclosure. 3 Attach door panel C. There is a “pocket” located at the top and bottom of each side panel into which the Door Panel (A) should insert. Ɣ Stand the 3 assembled sides of the locker up. D.
Assembly Instructions STEP 4: A. Once the Door Panel (A) is attached, it is time to secure the Door Panel (A) by attaching the Top Panel (C), Middle Panels (F) and Bottom Panel (G). B. Set the Top Panel (C) on top of the locker and screw it into place with 2 Round Head Screws (7) with the hook facing out. C. Open the Door Panel (A) and secure it using the screwdriver and Round Head Screws (7) at each corner, where shown. D.
Assembly Instructions C C B A C 7 A B D D H A F F F E F F B D F A G A E E 7 B E B D D D G D 8
ASSEMBLY INSTRUCTIONS Assembly Instructions STEPLocker 5: 6-Cubby A. A ttach the Double Hooks (4) to the Back Panel (D) using a Phillips screwdriver and the included Round Head Screws (7). 4. Attach coat hooks Ɣ Attach the coat hooks to the back panel using a Phillips 7 screwdriver and the included screws.
INSTALLATION INSTRUCTIONS 6-Cubby Locker Installation Instructions Multiple Locker Units Before you begin A. If you are using multiple locker units, secure them to each other for safety and security. B.Mount Set the next other. Ensure the mounting holes towards the top of the Right thelockers locker(s) toto a each wall for optimal safety. Panel (E) of the left locker line up with the corresponding mounting holes on the Left Panel (B) of the right locker. C.
INSTALLATION INSTRUCTIONS Installation Instructions 6-Cubby Locker Mounting Locker Units A. There are two holes near the top of the Back Panel (D) of your locker. B. Place your locker where you want to install it. Using a pencil, mark the location of each of these holes on the wall. Mounting the locker unit(s) to the wall C. Remove the locker(s) from the wall.
Notes 12
Notes 13
Notes 14
Limited Warranty 1. A dirCorp (the company) warrants to the purchaser that the product will be free from defects in workmanship and materials for a period of one (1) year from the date of purchase. 2. These warranties are not assignable or transferable to any other person. 3.
Disclaimer By purchasing products from AdirCorp, user agrees as follows: TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE PRODUCTS AND INFORMATION ON THIS SITE IS PROVIDED “AS IS” AND WITH ALL FAULTS AND ADIRCORP. MAKES NO PROMISES, REPRESENTATIONS, OR WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO THE PRODUCTS AND INFORMATION, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION OR DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND ADIRCORP.
Item Number: ADI629-206-SERIES 64 Mountainview Blvd. • Wayne, NJ • 07470 • © 2021 AdirCorp adircorp.
