User manual

20
You have to register an account firstly, keep the user, password, host, then fill in it.
Note: Only one DDNS can be chosen, for example, if you use manufacturer’s DDNS, the
3rd party one won’t work, if use the 3
rd
party DDNS, the manufacturer’s one won’t work.
3.5.4.2 Port forwarding settings:
1: Setting the IP address of the camera
The default IP address of the camera is : Http://192.168.1.99:99 The default IP address of
camera you can change to any other one you like, such as:
Change to: 192.168.1.109:109. or 192.168.1.99:90 etc.
Click “Apply”>fill in the user name and password of the camera>click “OK” then the camera
will reboot, wait about 30 seconds. You will get your changed IP address.
Figure 3.17
Make sure the “Subnet Mask”, “Gateway”, “DNS Server” is the same as your router.
2: Setting Port Forwarding in the router.
This is the most important step. Set port forwarding in router refer to the IP of your camera
correctly, then the DDNS will work. Because there are so many kinds of routers from all over
the world, so it’s difficult to show a fix steps, but there are some samples of different routers’
port forwarding settings as below, just for reference:
TP-LINK:
(1) Login the router.