User manual

ManualsBrandsADJ ManualsLEDLED bar

User Instructions

7/14

ULTRA HEX BAR 6

ADJ Products, LLC

6122 S. Eastern Ave. Los Angeles, CA 90040 USA

Tel: 323-582-2650 / Fax: 323-725-6100

Web: www.adj.com / E-mail: info@americandj.com

A.D.J. Supply Europe B.V.

Junostraat 2

6468 EW Kerkrade

Netherlands

service@adjgroup.eu / www.adj.eu

Tel: +31 45 546 85 00 / Fax: +31 45 546 85 99

Ultra Hex Bar 6 Specifications

Model:

Ultra Hex Bar 6

Voltage: 100V ~ 240V/50~60Hz

LEDs: 6 x 10W 6-in- Hex LED’s

Beam Angle: 40 Degrees

Working Position: Any safe working position

Power Draw: 55W

Power Cord Daisy Chain: 12 Fixtures Max.

Fuse: 2 Amp

Weight: 6lbs./ 2.82Kgs.

Dimensions: 23” (L) x 4.5” (W) x 6.5” (H)

585 x 110 x 165mm

Colors: RGBAW + UV Color Mixing

DMX Channels: 5 DMX Modes: 6 Channel Mode,

7 Channel Mode, 8 Channel Mode,

12 Channel Mode, & 18 Channel

Mode

Warranty: 2 Year (730 days)

Please Note: Specications and improvements in the design of

this unit and this manual are subject to change without any prior

written notice.

Auto Sensing Voltage: This xture contains a automatic voltage

switch, which will auto sense the voltage when it is plugged into

the power source.

Summary of content (12 pages)

PAGE 1
Ultra Hex Bar 6 Model: Ultra Hex Bar 6 Specifications Voltage: 100V ~ 240V/50~60Hz LEDs: 6 x 10W 6-in- Hex LED’s Beam Angle: 40 Degrees Working Position: Any safe working position Power Draw: 55W Power Cord Daisy Chain:12 Fixtures Max. Fuse: 2 Amp Weight: 6lbs./ 2.82Kgs. Dimensions: 23” (L) x 4.5” (W) x 6.
PAGE 2
©2013 ADJ Products, LLC all rights reserved. Information, specifications, diagrams, images, and instructions herein are subject to change without notice. ADJ Products, LLC logo and identifying product names and numbers herein are trademarks of ADJ Products, LLC. Copyright protection claimed includes all forms and matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted.
PAGE 3
Ultra Hex Bar 6 Power Cord Daisy Chain With this feature you can connect the fixtures to one another using the IEC input and output sockets. The quantity that can be connected is 12 fixtures maximum. After 12 fixtures you will need to use a new power outlet. They must be the same fixtures. DO NOT mix fixtures. Ultra Hex Bar 6 Fuse Replacement Disconnect the unit from its power source. Remove the power cord from the unit.
PAGE 4
Ultra Hex Bar 6 Features Ultra Hex Bar 6 Photometric Chart Ultra Hex Bar 6 Dimmer Curve Chart • • • • • • • Multi-Colors Six Operating Modes Electronic Dimming 0-100% Built in Microphone DMX-512 protocol 3-Pin DMX Connection 5 DMX Modes: 6 Channel Mode, 7 Channel Mode, 8 Channel Mode, 12 Channel Mode, & 18 Channel Mode. • ADJ RFC compatiable (Sold Separately) • Power Cord Daisy Chain (See page 21) Ultra Hex Bar 6 Warranty Registration The Ultra Hex Bar 6 carries a 2 year limited warranty.
PAGE 5
Ultra Hex Bar 6 Channel 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Value 18 Channel - DMX Values & Functions 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 Function RED 0% - 100% PIXEL 1 & 2 GREEN 0% - 100% PIXEL 1 & 2 BLUE 0% - 100% PIXEL 1 & 2 WHITE 0% - 100% PIXEL 1 & 2 AMBER 0% - 100% PIXEL 1 & 2 UV 0% - 100% PIXEL 1 & 2 RED 0% - 100% PIXEL 3 & 4 GREEN 0% - 100% PIXEL 3 & 4 BLUE 0% - 100% PIXEL 3 &
PAGE 6
Ultra Hex Bar 6 Set Up Power Supply: The ADJ Ultra Hex Bar 6 contains a automatic voltage switch, which will auto sense the voltage when it is plugged into the power source. With this switch there is no need to worry about the correct power voltage, this unit can be plugged in anywhere. Ultra Hex Bar 6 Channel 10 DMX-512: DMX is short for Digital Multiplex. This is a universal pro- tocol used as a form of communication between intelligent fixtures and controllers.
PAGE 7
POWER Ultra Hex Bar 6 Channel 1 2 3 4 5 6 7 8 9 10 Value 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 31 32 - 63 64 - 95 96 - 127 128 - 159 160 - 191 192 - 223 224 - 255 0 - 255 0 1 - 24 25 - 35 36 - 46 47 - 57 58 - 68 69 - 79 80 - 90 DMX+,DMX-,COMMON Ultra Hex Bar 6 Function SOUND 0 - 255 DMX512 12 Channel - DMX Values & Functions RED 0% - 100% GREEN 0% - 100% BLUE 0% - 100% WHITE 0% - 100% AMBER 0% - 100% UV 0% - 100% COLOR MACROS (See Color Macro ChartDMX512 on page 19) DMX+,DMX-,C
PAGE 8
Ultra Hex Bar 6 Operating Instructions Menu Lock: Ultra Hex Bar 6 Channel You can set the menu to lock after 30 seconds. When the menu is set to lock, press and hold the MODE button for at least 5 seconds to unlock and access the menu. To set the menu to lock after 30 seconds, press the MODE button until “OTHER” is displayed. Press the SET UP button so that LOCK:XXX” is displayed. “XXX” represents either ON or OFF. Press the UP or DOWN buttons so that ON is displayed. Now the menu will lock after 30s.
PAGE 9
Ultra Hex Bar 6 Channel 1 Value 0 - 255 2 0 - 255 3 0 - 255 4 0 - 255 5 0 - 255 6 0 - 255 Ultra Hex Bar 6 Channel 1 2 3 4 5 6 7 Value 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 6 Channel - DMX Values & Functions Function RED 0% - 100% GREEN 0% - 100% BLUE 0% - 100% WHITE 0% - 100% AMBER 0% - 100% UV 0% - 100% 7 Channel - DMX Values & Functions Function RED 0% - 100% GREEN 0% - 100% BLUE 0% - 100% WHITE 0% - 100% AMBER 0% - 100% UV 0% - 100% MASTER DIMMER 0% - 100% ADJ P
PAGE 10
Ultra Hex Bar 6 Operating Instructions Ultra Hex Bar 6 ADJ RFC Operation the UP and DOWN buttons to adjust intensity. 8. After you have adjusted the colors to make your desired color you can then activate strobing by pressing the SET UP button to enter the strobe mode. 9. “STRO: XX” will be displayed, this is strobe mode. The strobe can be adjusted between “00” (flash off) to “15” (fastest flash). SOUND ACTIVE - This button activates sound active mode.
PAGE 11
Ultra Hex Bar 6 ADJ RFC Operation The ADJ RFC remote (sold seperately) has many different functions and allows you to control your Ultra Hex Bar 6 from long distance. The ADJ RFC remote can control your system up to 150 ft. To use the RFC you must first activate the fixtures receiver, to activate the receiver please see the instructions on page 10. BLACKOUT - Pressing this button will blackout the fixture. Press this button for more then 3 seconds to activate default mode.
PAGE 12
Ultra Hex Bar 6 Operating Instructions tion (On) or deactivate it (Off). DMX State: This mode can be used as a precaution mode, that in case the DMX signal is lost, the operating mode chosen in the setup is the running mode the fixture will go into when the DMX signal is lost. You can also set this as the operating mode you would like the unit to return to when power is applied. 1. Press the MODE button until “DMX MODE” is displayed. 2. Press the SET UP button so that “NO:XXXX” is displayed.