Instructions / Assembly

Step Five
Hinges, Wire Truss Cable and Gate Stop Installation
A. Now you can install the frame hinges (4) and hang your gate.
B. Install the "S" Hook for the truss cable kit into the hole at the top
of the gate on the hinge side. Install the truss cable kit (3) by hooking
the turnbuckle into the hole at the bottom of the gate on the latch
side. Use the clamp provided to secure the cable, cut off excess.
Adjust turnbuckle to mild tension.
C. Install the Latch Bar to gate frame, then the Latch Keeper to the post.
D. Install Stop, using the carriage bold and nylock nut provided.
Paso Cinco
Hinges, Wire Truss Cable and Gate Stop Installation (Spanish?)
A. A continuction Ud. puede fijar las bisagras del marco (4) y instalar
la puerta.
B. Instale el cable de refuerxo del armazon (3), enganchando el tensor
en el agujero ubicado en lar parta de abajo de la puerta en el lado
del cerrojo, y pasando el extremo libre del cable a traves del agujero
umicado al tope del armazon de la puerta el en lado de la bisagra.
Utilice la abrazadera provista para asegurar el cable, y corte el exceso
del mismo. Ajuste el tensor a una tension moderada.
C. Instal la Barra del Cerrjo en el armazon de la puerta; seguidamente,
instale el Sujetador del Cerrojo al poste.
D. Instale el parador usando tornillos y tuercas del paquete.
Step Six
Installing Fence Boards, Adjusting Gate
A. Now you can install the fence boards to your specifications using
nails or screws. If you have trouble stabilizing your boards at the
outside edges of the Adjust-A-Gate™, you can use the 4 self-drilling
screws (10) provided and attach the boards directly to the gate frame.
B. By adjusting the turnbuckle on the truss cable you can fine tune the
latch to give you that perfect fit.
C. CONGRATULATIONS!! You have done a great job. You now have
a beautiful gate that matches your fence and looks like a custom job.
Now you can look forward to years of trouble free use.
Paso
Instale Las Tablas Mediante, El Adjuste Del Tensor
A. Ahora Ud. Puede instalar las tables de la cerca de acrerdo a las
especificaciones, utilizando calvos o tornillos. Si Ud. tiene problemas
paraestabilizar las tables en los bordes exteriors del los largueros de
la puerta Adjust-A-Gate™, Ud. Puede utiliazar los 4 tornillos
autorroscantes (10) provistos, y fijar las tables directamente al
armazon de la puerta.
B. Mediante el ajuste del tensor en el cable de reduerzo del armazon,
Ud. Puede hacer ajuste fino fel cerrojo para lograr asi ese ajuste
perfecto.
C. ¡¡FELICATIONES!! Ud. Ha hecho un magnifico trabjo! Ud. Tiene
ahora una Hermosa puerta que hace juego con su cerca y que luce
como si hubiera sido heca especificamente para ella. Ud. Puede
esperar muchos años ed uso sin tener problemas.
Step 5
Hinges, Wire Truss Cable and Gate Stop
Instale El Cable De Refuerxo Del Armazon
Step 6
Installing Fence Boards, Adjusting Gate
Instale Las Tablas Mediante,
El Adjuste Del Tensor