Specification

This Model L9 fits openings that taper narrower as they come away from the house with rounded front corners, have a

45-60” opening (inside dimension) in length along the house, and have 34-37” projection (inside dimension) out from

the house. Typically used with coregated metal wells.

Each loop on the grate moves independently, allowing the grate to adjust side to side to perfectly conform to a variety

of well sizes and contours within the given range. The grate does not adjust front to back, the range given for the

projection out from the house is simply the acceptable range for that model of grate.

Only use inside dimensions as the grate will fit inside the opening of your well and ensure you select the correct model

for your well opening’s size and shape. See the posted Measurement Guide for additional size information.

MINIMUM

& MAXIMUM

34” to 37”

45” to 60”

MODEL L9

PAGE 1
MODEL L9 34” to 37” 45” to 60” MINIMUM & MAXIMUM This Model L9 fits openings that taper narrower as they come away from the house with rounded front corners, have a 45-60” opening (inside dimension) in length along the house, and have 34-37” projection (inside dimension) out from the house. Typically used with coregated metal wells. Each loop on the grate moves independently, allowing the grate to adjust side to side to perfectly conform to a variety of well sizes and contours within the given range.