Measurement Guide

For openings that are 60 inches in
length along the house, both the
L6 or XL6 Models will work.
However, please note that the
L6 will be at it’s maximum width
and therefore will flex more
versus the XL6 that will be much
more rigid as 60 inches is it’s
minimum width. For this reason
we recommend the XL6 for higher
trafc areas.
The above models will not t rectangular wells, see page 3.
22” to 25”
45” to 60”
22” to 25”
60” to 66”
Adding a Security Kit?
Use Model SK6 with L6 & XL6 Grates
2
30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 +
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
+
Length Along The House At Widest Point (inches)
Projection Out From House in Center of Well (inches)
Model S4*
* Semi Circle Wells Only
Model L4
Model L5
Model L6
Model L7
Model L8
Model L9
Model XL7
Model XL8
Model XL9
SELECTING THE
RIGHT MODEL
6-LOOP GRATE
MODELS
Adjust-A-Grates fit inside the opening of
the window well, therefore only use inside
dimensions when measuring.
Measure the length along the house (listed on
the top of chart) and the projection out from
the house (listed on the left side of chart) at
the widest points and then select the correct
model for your size and shape of well using the
chart to the right.
STANDARD GRATE SIZE CHART
303.278.6262
1.888.877.4728
www.grate.com
MODEL L6 MODEL XL6
If the size of your well
does not match any of
the models shown, then
contact Adjust-A-Grate Inc.
for alternatives.
STANDARD
Model XL6