Operating instructions

6.4 Sewing with Zipper Cutter
–
Turn the DIP-Switch
b417.7
in switch setting "
OFF
".
–
Set the "
Program
" switch to "
04
".
–
Press the "
STOP
" key.
The program is activated.
In contrast to P01:
–
After sewing the sewn zipper is cut off.
–
The material is generally placed at the rear positioning point.
–
The shortest sewing length is 75 mm.
–
The light barrier cannot be activated.
6.5 Sewing with Zipper Cutter and Automatic Carriage Return
–
Turn the DIP-Switch
b417.7
in switch setting "
OFF
".
–
Set the "
Program
" switch to "
05
".
–
Press the "
STOP
" key.
The program is activated.
In contrast to P04:
–
After stacking the transport clasps are automatically run back to
the feed area.
–
The light barrier cannot be activated.
6.6 Sewing with Zipper Cutter and Material Return
–
Turn the DIP-Switch
b417.7
in switch setting "
OFF
".
–
Set the "
Program
" switch to "
06
".
–
Press the "
STOP
" key.
The program is activated.
In contrast to P04:
–
After sewing there is no stacking.
–
The material is transported back to the feed area by the transport
clasps.
–
The light barrier and the flap clamp cannot be activated.
18