Operating instructions

7.4 Sewing of Dual Piping with Piping Reverser
–
Turn the DIP-Switch
b417.7
in switch setting "
ON
".
–
Set the "
Program
" switch to "
07
".
–
Press the "
STOP
" key.
The program is activated.
In contrast to P01:
–
After the corner incision the pipings are reversed and the material
overlaps are drawn through the incision.
–
The light barrier and the flap clamp cannot be activated.
–
Only one sewing length L1 can be activated.
7.5 Sewing of Dual Piping with Piping Reverser and Automatic Carriage Return
–
Turn the DIP-Switch
b417.7
in switch setting "
ON
".
–
Set the "
Program
" switch to "
08
".
–
Press the "
STOP
" key.
The program is activated.
In contrast to P07:
–
After stacking the transport clasps are automatically run back to
the feed area.
7.6 Sewing of Simple Piping with Piping Reverser
Presupposition:
Optional equipment
0792 030901
(Reverser device
for simple piping) required.
–
Turn the DIP-Switch
b417.7
in switch setting "
ON
".
–
Set the "
Program
" switch to "
09
".
–
Press the "
STOP
" key.
The program is activated.
In contrast to P01:
–
After the corner incision the piping is reversed and the material
overlap of the piping and the right material strip is drawn through
the incision.
–
Before this operation the left transport clasp is removed aside.
–
The light barrier and the flap clamp cannot be activated.
–
Only one sewing length L1 can be activated.
20