Operating instructions

7.7 Sewing of Simple Piping with Piping Reverser and Automatic Carriage Return
–
Turn the DIP-Switch
b417.7
in switch setting "
ON
".
–
Set the "
Program
" switch to "
10
".
–
Press the "
STOP
" key.
The program is activated.
In contrast to P09:
–
After stacking the transport clasps are automatically run back to
the feed area.
7.8 Sewing of Asymmetrical Piping with Piping Reverser
–
Turn the DIP-Switch
b417.7
in switch setting "
ON
".
–
Set the "
Program
" switch to "
11
".
–
Press the "
STOP
" key.
The program is activated.
In contrast to P01:
–
After the corner incision the pipings are reversed and the material
overlaps are drawn through the incision.
–
Before this operation the left transport clasp is removed aside.
–
The light barrier and the flap clamp cannot be activated.
–
Only one sewing length L1 can be activated.
7.9 Sewing of Asymmetrical Piping with Piping Reverser and Automatic Carriage Return
–
Turn the DIP-Switch
b417.7
in switch setting "
ON
".
–
Set the "
Program
" switch to "
12
".
–
Press the "
STOP
" key.
The program is activated.
In contrast to P11:
–
After stacking the transport clasps are automatically run back to
the feed area.
21