Operating instructions

9.4 Testing the Piping Reverser for Dual Piping (745-23)
Program P43 corresponds to sewing program P07.
During the reversing procedure there is a stop after each step.
–
Set the "
Program
" switch to "
43
".
–
Press the "
STOP
" key.
The program is activated.
–
After the first step of the draw-through procedure the process is
stopped.
–
By pressing the "
+
" key the process is continued to the next stop
point.
9.5 Testing the Piping Reverser for Simple Piping (745-23)
Program P44 corresponds to sewing program P07.
During the reversing procedure there is a stop after each step.
–
Set the "
Program
" switch to "
44
".
–
Press the "
STOP
" key.
The program is activated.
–
After the first step of the draw-through procedure the process is
stopped.
–
By pressing the "
+
" key the process is continued to the next stop
point.
9.6 Testing the Piping Reverser for Asymmetrical Piping (745-23)
Program P45 corresponds to sewing program P11.
During the reversing procedure there is a stop after each step.
–
Set the "
Program
" switch to "
45
".
–
Press the "
STOP
" key.
The program is activated.
–
After the first step of the draw-through procedure the process is
stopped.
–
By pressing the "
+
" key the process is continued to the next stop
point.
25