Operating instructions

Key Function Symbol Indicator
b814 Positioning point forward LED
b815 Set counter Display
b816 Minus
b817 Plus
b818 Center and corner knives on / off LED / LED
b819 Order of closing of the flap clamps LED / LED
b820 Tacking on / off LED
b821 Tape feedon / off LED
b822 Light barrier on LED / Display
b823 Tape length when sewing with light barrier Display
b824 Correction the corner knife Display
b825 Correction of seam beginning and seam end Display
b826 Sewing of seam series Display
b827 Sewing length 3 Display
b828 Sewing length 2 Display
b829 Sewing length 1 Display
LED Function Indication
H1b Positioning point forward
H2 Light barrier NA / NE
H3c Flap clamp left
H4c Corner knife
H5b Center knife
H6b Flap clamp right
H7a Tacking
H8a Tape guide
11.7 Checking the Input Elements
–
Set the "
Program
" switch to "
62
".
–
Press the "
STOP
" key. The program is activated.
–
Press the input element to be checked.
The display will show the circuit diagram designation and switching
status of the input elements (e.g. "+B25").
The display will change when the switching status of any other
input elements is changed.
The switch status "
+
" means:
–
for switches with contact = contact open
–
for proximity switches = metal in front of the switch
–
for reflecting light barriers = no reflection
–
Continuous beam light barrier = beam uninterrupted
33